HOMEPOST ADBROWSESEARCHADS BY DAYMOST RECENTMOST POPULARHONOR PAYMENTFORUMHELP!

AD CATEGORY :: Drag Racing Cars :: Door Cars

Ad #1652663 Posted:2009-09-13 00:06:33

This ad expires in 8 days.

CHEVY MONZA, FULL TUBE CHASSIS CAR.

VERY LITE CAR, COMPLETE, ROLLING

$8,500.00

***********LAST SHOT HERE**********

AD RUNS OUT IN 8 DAYS, AFTER THAT, IT IS NO LONGER FOR SALE, HAVE SOLD OFF 3 MOTORS THAT WERE NOT BEING USED FOR NEXT YEAR, ONLY HAVE THIS SMALL BLOCK MOTOR LEFT.

COMPLETE MONZA RUNNING WITH THE 358" ROLLER MOTOR, PRO-BRAKE GLIDE WITH HARDENED INPUT, TCI 8" CONVERTER, YOUR CHOICE OF 750 CARB, ALKY OR GAS, TURNKEY, COMPLETE CAR AS LISTED. WILL RUN 6.40 AS IT IS, THIS CAR WILL WEIGH 2180 LBS. WITH THIS SET-UP, WET, READY TO RACE, OTHER WEIGHT LISTED FOR THE CAR WAS WITH A MOTOWN BLOCK MOTOR. WHERE CAR YOU FIND A DOOR CAR THAT WEIGHS LESS THAN 2200 LBS.FOR THIS KIND OF $$ ?????:

...........$13,000 FIRM!!!!!!!!!!!!

NO OFFERS OR TRADES, CASH ONLY, NO CASH-NO CALL PLEASE.

Above Added: Thu November 26, 2009, 10:51 am EST

LAST PRICE DROP, $8500.00 COMPLETE ROLLER, DO NOT WANT TO PART CAR OUT AS ASKED, DO NOT WANT TO TALK TO DREAMERS, THIS IS A QUALITY CAR FOR THE MONEY, IF AD RUNS OUT WITH NO SALE, YOU LOCAL GUYS WILL BE RACING AGAINST IT AGAIN NEXT YEAR !!!!.
YOU CAN'T BUY A CAR THIS LIGHT WITH PREVIOUS NHRA AND IHRA CHASSIS TAGS ON IT FOR THIS KIND ON $$$$$.

WILL SELL RUNNING WITH THE 427" ENGINE, PRO-BRAKE GLIDE AND 8" CONVERTER FOR $15,000 FIRM!!!!!!!!!!.

Above Added: Fri October 30, 2009, 9:50 pm EST

PRICE DROP****$9000.00 roller FIRM!!
This is the "BOTTOM DOLLAR" on this car, no offers lower, no trades, car will be sold as a complete roller with ALL electronics, MSD 7AL-2, electric shifter, jet hot coated headers, motor plates, drive shaft, rad, everything less engine and trans/converter.

Above Added: Sun October 4, 2009, 9:45 pm EST

Chassis was built from an Alston Pro-Gas 2X3 main frame kit, T.I.G welded, was told it was a 4130 chromoly cage, due to the light weight of the car I believe this to be true but have not had the car sonic tested, although as listed, it had a valid IHRA and NHRA chassis certs., both expired tags are still on the main hoop.
The 383" engine was just freshened, had 105 previous runs, not run since, heads are not on it.
The 358" engine has Brodix #9 aluminum heads on it.
The 364" engine is also just freshened, all lunati components, Dart 215 heads, not started yet.

Above Added: Sun September 13, 2009, 9:33 pm EST

This is a full tube chassis car, tubular A-arm front, ladder bar rear, coil over front shocks, new aluminum rear 18" coil over shocks. 12 bolt rear with New: Moser axles, spool, 4:88 gears and brakes, all new this year. 14/32W slicks, new this year too. MSD 7AL ignition, Autometer liquid filled gauges, memory monster tach. All Lexan windows, glass front end and hood, gutted and lightened steel doors that are re-movable. Dedenbear: crossover delay box, throttle stop timer, throttle stop. Electric shifter, 3-step box, Painless fused switch panel, relays for all major circuits, all wiring done NEW this year. Optima blue battery, 5 gal fuel cell, New Holley black pump, #8 braided fuel line, front to rear, all NEW this year.
Motown block 427" small block, Brodix CNC ported Track-1 heads W/2.08/1.600 valves, .680" roller cam, special grind for throttle stop racing, very big MPH set-up. Holley 950 HP gas carb. Greiner Pro-tree 1:76 glide, 8" select Perf. converter. All shields and SFI equipment to bracket race, and run 10.90 and 9.90. Chassis has expired IHRA and NHRA cert. tags on it now. Car is very light, just scaled at a local shop, total weight running with the Motown block is 2258 lbs. Will fit a 6'3" tall driver, 230 lbs. Belts good for 1 more year. Engine was built new this winter with everything brand new in it, still standard bore, has 70 total passes from new on the complete drivetrain, is a super easy 1 man car to race, has won a lot of races, runs cooler on gas than my alky dragster, never goes over 180 even in 94 degree heat at the end of a run!. Selling to run a second dragster for our sponsor. Car is available running, with the 427", or choice of 383", 364" or 358" motors, or rolling.
--Rolling: $10,000 FIRM
--complete with 427, $18,000
--complete with 364", NEW $16,000
--complete with 358", $16,000
--complete with 383", NEW $$17,000

Can deliver or meet for $2 a mile.

This item is USED

Trades NOT ACCEPTED

Item Location: TONAWANDA, NY Get Directions To This City

This ad expires in 8 days.

Is this classified ad inappropriate?
Report it here

Seller Information
Ad posted by: sneakypete (#23987)
RaceSpace Profile: View
Member Since: 2003-10-14
Number of Honor Payments: 2
Average Accepted Sale Price: $2,000.00
Average Honor Payment: $20.00

Phone Number: 716-984-0959
Phone Number: 716-984-0959

OFFICIAL HONOR MEMBER
Honor Member Rating: 2

Member OTHER ADS

PAID SPONSORSHIPS

http://www.cvproducts.com/Category.aspx?ID=10000615

Your Recently Viewed Ads

Questions & Answers about this ad

Question:

SNEAKYPETE, CHECK ADD--1693750,EVEN UP DON'T WANT TO WASTE YOUR TIME. THANKS BRUCE

Answer:

Car looks nice, not really what I was looking for, I'll think it over and let you know, thanks for looking: Pete On [2009-10-28 09:04:41] pro390 wrote: > SNEAKYPETE, CHECK ADD--1693750,EVEN UP DON'T WANT TO WASTE YOUR TIME. THANKS BRUCE

Questions & Answers about this ad

Question:

Hi.. I'm very interested in your car but I have a back halved 1970 AMX one of 4200 made by AMC for sale. Need to sell or trade that. If I don't find a deal soon my car will also be put to the side and I guess cut it up to make it lighter,, Hate to do it, it's a very clean rust free car I owned since 1975... Everyone seem like they want to follow Chevy's and not take my car and put their engine in it.. If you know anyone check out the pictures on my Home page here on Racing Junk... Peace, Bill

Answer:

I'm not looking for any trades, I have dropped the price on this car twice, and at what its at now, I could never replace it. If it goes into storage, it will be a great pro-tree car next year for us to run a limited schedule with as we will be racing (2) dragsters also. If things change on your end, feel free to get in touch, unfortunately I don't know anyone looking for a car right now, take care: Pete On [2009-11-11 22:20:10] nhra326 wrote: > Hi.. > I'm very interested in your car but I have a back halved 1970 AMX one of 4200 made by AMC for sale. Need to sell or trade that. If I don't find a deal soon my car will also be put to the side and I guess cut it up to make it lighter,, Hate to do it, it's a very clean rust free car I owned since 1975... Everyone seem like they want to follow Chevy's and not take my car and put their engine in it.. > If you know anyone check out the pictures on my Home page here on Racing Junk... > > Peace, > Bill

RESOURCE LINKS

Financing
- RV Lending Group
Transportation/Shipping
- Advertise Here
Purchase Protection
- Escrow.com
RV Insurance
- Kevin Severance Insurance

I Put My Race Car On This Site And Sold It With In 10 Days,and Got The Best Of Both Worlds. Sold The Car And The Buyer Wants Me To Drive It For Them. Thanks RacingJunk.com.

MIKE - AL

Copyright ©2005 RacewayMedia LLC All Rights Reserved.
Designated trademarks and brands are the property of their respective owners.
Use of this Web site constitutes acceptance of the
RacewayMedia LLC Terms, Classified Guidelines and Privacy Policy

Raceway Media, LLC
PO Box 491, North Adams, MA 01247
Tel: 413.663.3496 • Fax: 413.663.3615 • Email: support@racingjunk.com

Execution Time: 1811 ms

Buy, Sell and Trade Race Cars for Free